TRUSTED BY HOMEOWNERS ACROSS THE REGION
Your Kitchen, Designed for Your Wells Home
Your kitchen needs to be designed properly for your home. Not adjusted from a standard range, not adapted as it goes, but planned from the room itself so that everything works as it should once it is in place. From design through to the day it is installed, one team handles it all.
A bespoke kitchen design for a Wells home by Mastercraft Kitchens
Designed Around Your Home
If you are planning a new kitchen in your home in Wells, the starting point is always the room itself. Its proportions, its quirks, its natural flow. That is what the design is built around. Nothing useful can happen until that is properly understood.
Homes in Wells vary more than most people expect. A thatched cottage on the edge of town behaves very differently to a contemporary architect-designed house or a period farmhouse with thick stone walls and uneven floors. Your kitchen is designed from scratch around your room, not adapted from something created for a completely different kind of home.
Alcoves, chimney breasts, sloping ceilings: these are resolved at the design stage, not on the day installation begins. By the time manufacturing starts, every dimension is already accounted for.
The same team that designs your kitchen understands exactly how it will be built. So when it arrives, everything has already been planned for how your room sits. That continuity matters more than most people realise until they have experienced a project without it.
Crafted Cabinetry, Built to Last
Your kitchen is made in our own UK workshop, built specifically for your home. Every cabinet is rigid and fully assembled before it leaves the factory. Nothing arrives as flat-pack components to be put together on site. Factory assembly produces tighter tolerances and a more consistent finish, and that difference is something you will notice every day.
The same standard runs through the whole kitchen, not just the parts you see most. Drawer runners, hinges, interior fittings: all specified and finished to the same level as the doors and worktops. What you cannot see is built to the same standard as what you can. That is what determines how well your kitchen holds up over years of daily use.
Because your kitchen is made in our own workshop, it is not constrained by standard sizes or catalogue configurations. If your room needs an unusual width, a run that follows a sloping ceiling, or something specific to your space, it is designed and built exactly as required. Your room sets the brief, and the cabinetry follows from that.
One Team, from Design to Installation
From your first conversation through to the day your kitchen is handed over, the whole project sits with Mastercraft. Design, manufacturing, installation: one team, one process. You are not left coordinating separate trades or chasing progress. Everything moves forward properly because the same people hold it from start to finish.
The designers who plan your kitchen understand exactly how it will be built. The team who builds it knows what was designed and why. That continuity makes a real practical difference, especially when your room has unusual features or specific constraints. No one arrives on site seeing your plans for the first time.
Wells homes each bring their own starting point. A stone cottage with low beams and uneven floors is a different kind of project to a contemporary extension or a converted period farmhouse. Your project is treated on its own terms, designed around what your home actually is rather than adjusted to fit a programme drawn up for something else entirely.
Your cabinetry is manufactured to the exact dimensions of your room, measured precisely before anything is made. When installation begins, everything arrives ready to fit. There are no on-site adjustments to compensate for details that were not fully resolved at the design stage. Everything has been worked out well before anyone sets foot in your kitchen with a tool.
Different ways your kitchen can be approached
We Work Across Wells and the Surrounding Area
From a thatched cottage close to the cathedral to a newer home on the outskirts of the city, every project begins in the same place. Your room, your layout, your home. We work across Wells and the wider Somerset area, and if you are further afield, it is worth getting in touch. We also work regularly across our South West coverage area, including nearby towns such as Glastonbury and Frome.
Every Mastercraft kitchen is designed, built and installed by our own in-house team
Your Home in Wells. Your Kitchen.
Whether you are remodelling an existing kitchen or starting completely from scratch, the process is the same. It begins with your room and everything is designed around it. Your project is handled by one team from the earliest conversation right through to the day the kitchen is in place. Everything has been understood from the start and carried through by the same people. That is what makes the difference.
Bespoke kitchen design in Wells, by Mastercraft Kitchens
Bespoke Kitchens in Wells and Nearby Towns
We also work across the surrounding area, including the towns below.
Why People in Wells Choose Mastercraft
A kitchen at this level is not just about how it looks. It is about whether it has been thought through properly from the start and carried through without compromise. Your kitchen is designed from scratch around your room, not built from a showroom model and adjusted to fit. It is made in our own UK workshop, by the same team that designed it, so nothing is lost between the drawing and the finished thing. The design, the making, the installation: all handled by one team, with one clear line of responsibility. Built to work properly in your home, and to keep working for years.
Design, manufacturing and installation are all handled by the same team, with no handoffs between separate contractors.
Every kitchen is designed from scratch for your room, not adapted from a standard range.
Your cabinetry is made in our own UK workshop, fully assembled before it leaves the factory.
Every component is specified to the same standard, so your kitchen is built to last well beyond the first few years.
The design always starts with your room. That is where every good kitchen begins.
Start with a Conversation
The process starts with a conversation in your home. We look at the room properly and talk through what needs to work, so you get a clear sense of how it could come together.
Arrange a design consultation and we will come to you, look at the space, and talk through the possibilities. That is all it is at this stage.
Download Our Kitchen Brochure
Our brochure covers the full range of Mastercraft kitchen styles, materials, and finishes. Download it instantly and receive our design advice guide — useful reading whether you are at the early ideas stage or ready to start planning in earnest.
Download Your Free BrochureOur Kitchen Ranges Have Been Featured in…
Frequently Asked Questions
How long does a bespoke kitchen project take from start to finish?
Most kitchens take around three to five months from the initial design consultation through to the end of installation. That covers the design and sign-off process, manufacturing, and the installation itself. If your project is part of a wider renovation or involves structural work, the overall timeline will depend on how the building work is sequenced. We talk through all of this early on so you know what to expect.
What happens at the first consultation?
We come to your home in Wells and look at the room properly. We talk through how you use the space, what is not working at the moment, and what you want from the new kitchen. It is a real conversation, not a presentation. By the end of it, you should have a clear sense of how we work and whether we are the right fit for your project.
Can you work with unusual rooms, low ceilings, or awkward layouts?
Yes, and honestly those are the projects we are most suited to. Wells homes in particular often have features that a standard kitchen company would struggle with: thick stone walls, beams at unexpected heights, floors that are not quite level, alcoves that do not conform to any standard dimension. These things are resolved at the design stage. Because we make your kitchen ourselves, we are not constrained by off-the-shelf sizes.
What does a bespoke kitchen typically cost?
Bespoke kitchens vary considerably depending on the size of the room, the materials and finishes you choose, the appliances, and the level of storage detail involved. As a starting point, most Mastercraft kitchens sit in the range of around fifteen to thirty thousand pounds for the cabinetry, worktops and installation, with larger or more complex projects going beyond that. The best way to understand what your kitchen will involve is to have a conversation early on. What we can say is that this is a long-term investment in your home, and the quality is built to reflect that.
What kitchen styles are available?
Because every kitchen is designed from scratch, the style is led by your home and your taste rather than a fixed catalogue. Shaker and in-frame designs suit many of the period properties in Wells particularly well, but if your home calls for something more contemporary, that is equally possible. We talk through what feels right for your space at the design stage.
How is the kitchen manufactured?
Your kitchen is made in our own UK workshop. Every cabinet is rigid and fully assembled there before it is delivered to your home. Nothing arrives as flat-pack to be put together on site. This means tighter tolerances, a more consistent finish, and cabinetry that is ready to install precisely as designed. The manufacturing process is covered in more detail on our quality and manufacturing page.
Do you work on larger renovation projects or extensions?
Yes, and having design and manufacturing under one roof is particularly useful in those situations. When a kitchen is part of a wider building project, sequencing matters. We can work alongside your architect or builder, make sure the kitchen design is fully resolved before the building work reaches that stage, and have the cabinetry ready to install at the right point. There are no delays caused by design decisions not being made in time, because everything is handled by the same team.
Who carries out the installation?
Installation is carried out by our own team. They know the kitchen thoroughly because they have been involved in making it. When they arrive on site, they are not seeing your room for the first time and working it out as they go. The plans have been understood from the beginning, and the cabinetry has been made to fit. Installation is a planned process, not a problem-solving exercise.
Do I need to have a clear idea of what I want before getting in touch?
Not at all. Many people come to us with nothing more than a sense that their kitchen is not working and needs to change. The design process starts with the room and your situation, and ideas develop from there. If you have specific things in mind, that is helpful. If you do not, the conversation will get there naturally.
How precise is the measuring process?
Very. Before anything is made, your room is measured carefully and those measurements inform every dimension of the cabinetry. This is not a case of making something to approximate sizes and adjusting on site. The kitchen is made to fit your room as it actually is, including any irregularities in the walls or floor.
Do you work across the wider Somerset area, or only in Wells itself?
We work across Wells and the surrounding area, including Glastonbury, Frome, Minehead and the villages in between. If you are in Somerset and wondering whether we cover your location, it is worth getting in touch. Distance is rarely a barrier for the right project.
How do I get the process started?
Arrange a design consultation and we will come to your home in Wells. We look at the room, talk through what you need, and give you a clear picture of how the project would work. That is the right place to start.
