TRUSTED BY HOMEOWNERS ACROSS THE REGION
Your Kitchen, Designed for Your Home in Washington
Your kitchen needs to be designed properly for your home. Not adapted from a standard range, not adjusted as it goes, but planned from the room itself, so everything works as it should once it is in place. The same team handles your design, your manufacturing and your installation, so nothing gets lost between one stage and the next.
A bespoke kitchen design for a Washington home by Mastercraft Kitchens
Designed Around Your Home
If you are planning a new kitchen in your home in Washington, the starting point is always the room itself. The proportions, the light, the way you move through the space. That is what the design has to respond to.
Homes in Washington vary more than most people expect. A converted farmhouse behaves very differently to a large detached modern home or a stone-built cottage. Each one has its own layout, its own constraints, its own character. Your kitchen is designed from scratch around your room, not taken from something created for a different kind of home and adjusted to fit.
Alcoves, chimney breasts, awkward corners: these are resolved at the design stage. By the time manufacturing begins, every dimension has already been accounted for. Nothing is left to figure out later.
The same team takes your kitchen from the first design conversation through to the finished installation. The person who designs it understands exactly how it will be made, so when it arrives, it already fits how the room has been planned.
Crafted Cabinetry, Built to Last
Your kitchen is made in our own UK workshop, built specifically for your home. Every cabinet is rigid and factory assembled before it leaves, not flat-pack components put together on site. That produces tighter tolerances and a more consistent finish, and it means your kitchen arrives ready to install rather than ready to build.
The same standard runs through the whole kitchen, not just the parts you see every day. Drawer runners, hinges, internal fittings: all specified and finished to the same level as the doors and worktops. The parts you do not see are built to the same standard as the ones you do. That is what determines how well your kitchen holds up over years of daily use.
Because your kitchen is made in our own workshop, it is not limited to standard sizes or catalogue configurations. If your room needs an unusual run of cabinetry, a section beneath a sloping ceiling, or something specific to your layout, it is designed and built exactly as required. You can find out more about how we approach quality and manufacturing if that is useful. Your space sets the brief.
One Team, from Design to Installation in Washington
From your first conversation through to the day your kitchen is handed over, the whole project sits with Mastercraft. Design, manufacturing, installation: one team, one process. You are not left coordinating trades or chasing progress. Everything moves forward because one team holds it from start to finish.
The designers who plan your kitchen understand exactly how it will be built. The team who builds it knows what was designed and why. That continuity makes a real practical difference, especially when your room has unusual features or specific constraints. No one arrives on site seeing your plans for the first time.
Washington homes each bring their own starting point. A Georgian townhouse has different demands to a converted farmhouse or a large modern detached. Your project is considered on its own terms. It is not adjusted to fit a standard programme drawn up for a different kind of house.
Your cabinetry is manufactured to the exact dimensions of your room, measured precisely before anything is made. When installation begins, everything arrives ready to fit. There are no on-site adjustments to compensate for things that were not fully thought through at the design stage. To understand more about how the process works, that is a good place to start.
Different ways your kitchen can be approached
We Work Across Washington and the Surrounding Area
From stone-built cottages in the older parts of Washington to newer family homes across the district, every project begins in the same place: your room, your layout, your home. We also work across nearby towns including Jarrow, Hebburn and Wallsend, and more broadly across our North East coverage area. Whatever the property, the starting point is always the room itself.
Every Mastercraft kitchen is designed, built and installed by our own in-house team
Your Home in Washington. Your Kitchen.
Whether you are remodelling an existing kitchen or starting from scratch in a new space, the process is the same: it begins with your room and is designed around it. Your layout, your proportions, your way of using the space. From the earliest conversation through to the day the kitchen is in place, the same team is with you throughout. Everything has been understood from the start and carried through by the same people.
Designed and made for homes in Washington by Mastercraft Kitchens
Bespoke Kitchens in Washington and Nearby Towns
We also work across the surrounding area, including the towns below.
Why People in Washington Choose Mastercraft
A kitchen at this level is not just about how it looks. It is about whether it has been thought through properly from the start and carried through without compromise. Your kitchen is designed from scratch around your specific room, not pulled from a standard range and adjusted. It is built in our own UK workshop by the same team that designed it, which means the people making it already understand your space. Design, manufacturing and installation all sit with one team, so there are no gaps in responsibility and nothing gets lost between one stage and the next. That continuity, from the first conversation to the finished kitchen, is what makes the difference over the years.
The same team handles your design, manufacturing and installation, so responsibility never passes to someone else.
Every kitchen is designed from scratch around your room, not adapted from a catalogue.
Your cabinetry is built in our own UK workshop, factory assembled before it reaches your home.
The same standard of finish runs through every part of the kitchen, including the parts you will not see daily.
The design always begins with your room, your proportions and how you actually use the space.
Start with a Conversation
The process starts with a conversation in your home. We look at the room properly and talk through what needs to work.
From there, you will have a clear sense of what is possible and how the project would unfold. Arrange a design consultation to get started.
Download Our Kitchen Brochure
Our brochure covers the full range of Mastercraft kitchen styles, materials, and finishes. Download it instantly and receive our design advice guide — useful reading whether you are at the early ideas stage or ready to start planning in earnest.
Download Your Free BrochureOur Kitchen Ranges Have Been Featured in…
Frequently Asked Questions
How long does a bespoke kitchen project take from start to finish?
Most kitchens take around three to five months from the initial design consultation through to completed installation. The design and planning stage typically takes four to six weeks, manufacturing runs for around eight to ten weeks, and installation usually takes one to two weeks depending on the size of the kitchen. If your project is part of a larger renovation or extension, the timescales are planned around the wider build programme.
What happens at the first design consultation?
We come to your home in Washington and look at the room properly. That means understanding the proportions, the light, where things currently sit and what needs to change. We talk through how you use your kitchen and what is not working about the current setup. There is no presentation and no pressure. It is just a conversation in the room itself, which is the only way to start a project like this properly.
What does a bespoke kitchen typically cost?
Bespoke kitchens vary significantly depending on the size of the room, the materials you choose, the appliances, and the level of storage detail involved. As a guide, most projects at Mastercraft sit somewhere between fifteen and fifty thousand pounds, though larger or more complex kitchens can go beyond that. It is a meaningful investment, and the reason most people make it is longevity. A kitchen designed and built properly for your home, from materials that hold up, is not something you replace in ten years. It is worth understanding the full picture before committing to anything.
Can you design a kitchen for a room with awkward features, like a sloping ceiling or an alcove?
Yes, and this is where designing from scratch makes a real difference. Standard ranges are built around standard rooms. If your kitchen has a chimney breast, a low ceiling on one run, an alcove that does not match any catalogue dimension, or any other feature that makes the space unusual, those things are resolved at the design stage. By the time manufacturing begins, everything has already been worked out.
What styles of kitchen do you offer?
Because every kitchen is designed from scratch, the style is led by your home and your taste rather than a fixed collection. That said, the most common directions are shaker, handleless and in-frame, and there is a wide range of finishes, colours and materials within each. If you want to explore what might suit your home in Washington before getting in touch, the kitchen styles and finishes section of the site gives a useful overview.
Do you work on larger renovation projects or extensions?
Yes, and having design and manufacturing under one roof is particularly useful when a kitchen is part of a wider building project. If you are extending your home or reconfiguring the ground floor, the kitchen design can be developed in step with the build, so the two do not end up working against each other. We are used to coordinating with architects and builders and can fit the manufacturing programme around your construction timeline.
Who carries out the installation?
Installation is carried out by Mastercraft's own installation team, not subcontracted to a third party. They are familiar with exactly how the kitchen has been designed and built, which means nothing is being interpreted on site for the first time. If there are any small adjustments to make during installation, they are handled by people who understand the whole project.
Do I need to have a design in mind before getting in touch?
Not at all. Most people come to the first conversation with a rough sense of what they want the kitchen to do, and not much more than that. The design process starts with the room and works outward from there. You do not need drawings, mood boards or a fixed idea. Just a sense that your current kitchen is not working and that you want to do it properly this time.
Can you match materials or finishes to the rest of my home?
Yes. Because your kitchen is designed specifically for your home, the materials and finishes are chosen in that context, not from a fixed palette. If your home has a particular character, whether that is a stone-built cottage, a Georgian townhouse or a contemporary new build, the design takes that into account. Matching to existing joinery, flooring or architectural details is a normal part of the process.
What areas do you cover near Washington?
We work across Washington and the surrounding towns throughout Tyne and Wear and the wider North East. That includes Jarrow, Hebburn, Wallsend and the areas beyond. If you are unsure whether your home falls within our area, just get in touch and we will confirm.
How do I know the kitchen will actually fit when it arrives?
Your room is measured precisely before manufacturing begins. Every cabinet is made to those specific dimensions. By the time installation day arrives, everything has already been resolved on paper. There are no on-site improvisations to fill gaps or correct things that were not fully thought through at the design stage. That is the point of designing and building it properly in the first place.
What if I want to make changes during the design process?
Changes during the design stage are a normal part of the process. The design is developed with you over several conversations, not handed to you finished and fixed. It is once manufacturing begins that the drawings are finalised, so there is a proper window to refine, reconsider and get it right before anything is built.
