TRUSTED BY HOMEOWNERS ACROSS THE REGION
Your Kitchen, Designed for Your Honiton Home
Your kitchen needs to be designed properly for your home. Not adapted from a standard range, not adjusted as installation begins, but planned from the room itself, so everything works as it should once it is in place. The same team handles design, manufacturing and installation, so nothing is lost between those stages.
A bespoke kitchen design for a Honiton home by Mastercraft Kitchens
Designed Around Your Home
If you are planning a new kitchen in your home in Honiton, the starting point is always the room itself. The proportions, the light, the way you move through the space. Everything begins there, before a single cabinet is drawn up.
Homes in Honiton vary more than most people expect. A converted barn behaves very differently to a thatched cottage, a period farmhouse or a contemporary architect-designed home. Your kitchen is designed from scratch around your room, not adapted from something created for a different kind of house entirely.
Alcoves, chimney breasts, sloping ceilings: these are resolved at the design stage, not worked around on site. By the time manufacturing begins, every dimension has already been accounted for. There are no surprises left to deal with once installation starts.
The designer who draws up your kitchen understands exactly how it will be made and installed. That means the design is not just a concept on paper. It is a set of decisions that carry through from the first conversation to the finished room, held by the same team throughout.
Crafted Cabinetry, Built to Last
Your kitchen is made in our own UK workshop, built specifically for your home. Every cabinet is rigid and factory assembled before it leaves. That produces tighter tolerances and a more consistent finish than anything assembled in your home from flat-pack components. You can feel the difference the moment installation begins.
The same standard runs through the whole kitchen, not just the parts you see every day. Drawer runners, hinges, interior fittings: all specified to the same level as the doors and worktops. The parts you do not see are built to the same standard as the ones you do, and that is what determines how well your kitchen holds up over years of daily use.
Because your kitchen is made in our own workshop, it is not constrained by standard sizes or catalogue configurations. If your room needs an unusual width, a run that follows a sloping ceiling, or a layout specific to your space, it is designed and built exactly as required. Your space sets the brief. Nothing is forced to fit a pre-existing format.
One Team, from First Conversation to Finished Kitchen
From your first conversation through to the day your kitchen is handed over, the whole project sits with Mastercraft. Design, manufacturing, installation: one team, one process. You are not left coordinating trades or chasing progress. Everything moves forward properly because one team holds it from start to finish.
The designers who plan your kitchen understand exactly how it will be built. The people who build it know what was designed and why. That continuity makes a real practical difference, especially when your room has unusual features or specific constraints. No one arrives on site seeing your plans for the first time.
A converted barn near Honiton brings different challenges to a thatched cottage or a new architect-designed home on the edge of town. Each starts from its own set of conditions. Your project is approached on its own terms, not adjusted to fit a standard programme drawn up for a different kind of home. How we work reflects that from the outset.
Your cabinetry is manufactured to the exact dimensions of your room, measured precisely before anything is made. When installation begins, everything arrives ready to fit. There are no on-site adjustments to compensate for things that were not fully resolved earlier. By that point, every decision has already been made.
Different ways your kitchen can be approached
We Work Across Honiton and the Surrounding Area
From farmhouses set back along rural lanes to newer homes on the edges of town, every project we take on in this part of Devon begins in the same place: your room, your layout, your home. We cover Honiton and the wider area as part of our South West coverage, working with homes of all kinds across the region.
Every Mastercraft kitchen is designed, built and installed by our own in-house team
Your Home in Honiton. Your Kitchen.
Whether you are remodelling an existing kitchen or starting from scratch in a property you have just moved into, the process is the same. It begins with your room and is designed around it. The team works with you from the earliest conversation through to the day the kitchen is handed over and in use. Everything has been understood from the start and carried through by the same team.
Mastercraft bespoke kitchens designed for homes in Honiton
Bespoke Kitchens in Honiton and Nearby Towns
We also work across the surrounding area, including Sidmouth, Exeter and Ilfracombe.
Why People in Honiton Choose Mastercraft
A kitchen at this level is not just about how it looks. It is about whether it has been thought through properly from the start, and carried through without compromise. Your kitchen is designed from scratch around your room, not selected from a range and adjusted to fit. It is built in our own UK workshop by the same team who designed it. Design, manufacturing and installation all sit with one team, so nothing is lost in translation between those stages. There is no showroom model to work back from. The starting point is always your home, and the process runs from there to the finished kitchen without handoffs or gaps in responsibility.
Design, manufacturing and installation are handled by one team, so your project stays consistent throughout.
Every kitchen is designed from scratch for the specific room, not adapted from an existing range or catalogue.
Your cabinetry is built in our own UK workshop, factory assembled and made to last.
The same build standard runs through the whole kitchen, including the parts you will never see on a daily basis.
The design begins with your room, your dimensions, your home, and everything follows from that.
Start with a Conversation
The process starts with a conversation in your home. We look at the room properly and talk through what needs to work, what the space allows, and how your kitchen could be laid out.
Arrange a design consultation and we will come to you. Seeing the room in person is where everything useful begins.
Download Our Kitchen Brochure
Our brochure covers the full range of Mastercraft kitchen styles, materials, and finishes. Download it instantly and receive our design advice guide — useful reading whether you are at the early ideas stage or ready to start planning in earnest.
Download Your Free BrochureOur Kitchen Ranges Have Been Featured in…
Frequently Asked Questions
How long does a bespoke kitchen project take from start to finish?
Most kitchens take around three to five months from the initial design stage through to installation being completed. The design phase usually takes four to six weeks, followed by manufacturing, which typically runs six to ten weeks depending on the complexity of your kitchen. Simpler projects can move faster. If your room has a lot of unusual features or the project is part of a wider renovation, allow a little more time at the design stage to get everything properly resolved.
What happens at the first consultation?
We come to your home and look at the room properly. That means understanding how the space is used, what is not working about the current layout, and what the room allows in terms of layout options. We talk through what you want the kitchen to do, and from there we can start thinking about how to design it. It is a conversation, not a presentation.
What does a bespoke kitchen typically cost?
It varies genuinely, because every kitchen is different. The main factors are the size of the room, the materials and finishes you choose, the appliances you want to include, and the level of storage detail and internal fittings. A bespoke kitchen from Mastercraft is a significant investment, and most projects sit in a range where the quality of design and build is central to the decision. The right way to get a realistic sense of where your project would sit is to have a conversation about your specific room. What we can say is that bespoke cabinetry built in our own workshop and designed properly for your home will outlast almost anything bought off the shelf, and it is worth thinking about it in those terms.
Can you work with awkward or unusual rooms?
Yes, and in many ways those are the projects where designing from scratch makes the most difference. Sloping ceilings, chimney breasts, alcoves, rooms that are not square, spaces that have been extended or altered over time: all of these are resolved at the design stage. By the time your kitchen is manufactured, every dimension has been worked out for your specific room. Nothing is being figured out when the fitters arrive.
What styles of kitchen are available?
Because every kitchen is designed from scratch, you are not choosing from a fixed range. That said, the most popular styles we work in are shaker, in-frame and handleless designs, and we can work across a wide range of finishes, colours and materials. If you have a particular look in mind, or a property with a strong character you want the kitchen to sit well within, we work from there rather than trying to fit your home to an existing style.
How is the kitchen manufactured?
Your kitchen is made in our own UK workshop. Every cabinet is factory assembled as a rigid unit before it leaves, which means it arrives on site ready to install. This produces a more precise and consistent result than cabinetry assembled from flat-pack components in your home. The same level of specification runs through the whole kitchen, from the carcases and drawer runners through to the doors and worktops.
Do you work on larger renovation projects or extensions?
Yes, and having design and manufacturing under one roof makes a real difference when a kitchen is part of a wider building project. If you are extending, remodelling or reconfiguring a significant part of your home, the kitchen design needs to work in close coordination with the build programme. Because we handle everything ourselves, we can engage with architects, builders and project managers directly, and make sure the kitchen dimensions and services are properly accounted for before work starts. It removes one of the more common sources of problems on larger projects.
Do I need to visit a showroom?
No. The starting point is a conversation in your home, not a showroom visit. Seeing your room in person is far more useful than anything we could show you in a generic setting. You are welcome to visit our store if you want to see materials, finishes and hardware up close, but it is not a required step and it is never the starting point.
How precise is the measuring process?
Your room is measured in detail before anything is manufactured. We account for walls that are not perfectly straight, floors that are not level, and any fixed features like chimney breasts or structural elements. Those measurements feed directly into manufacturing, so your cabinetry is built to the actual dimensions of your room, not to an assumed or rounded figure.
Who handles the installation?
Installation is carried out by our own team. They are familiar with the design because it has been through one process, not passed between separate contractors. By the time they arrive at your home, they know what was designed, how it was built, and exactly how it should go together. There is no one on site interpreting someone else's plans for the first time.
How far in advance should I start planning?
For most projects, starting the conversation three to six months before you want the kitchen installed is sensible. That gives enough time for the design to be worked through properly, manufacturing to be completed without being rushed, and installation to be scheduled at a point that suits you. If your kitchen is part of a building project with a fixed programme, get in touch earlier so we can align with your build timeline.
Do you work with older or listed properties?
Yes. Older properties around Honiton, including period farmhouses, thatched cottages and converted farm buildings, often have the kind of rooms that make bespoke design most worthwhile. Uneven walls, unusual ceiling heights, original features that need to be worked around: these are the things that standard fitted kitchens struggle with. Designing from scratch means the kitchen is built for what the room actually is, not what a standard programme assumes it should be.
