Kit Inc. 5M natural LED strip, 60 lights per metre, 50mm cut points, 2 x 2M soldered cable at both e

This is a 5 metre run of LED tape, supplied with 60 lights per metre in a natural white tone. It is chosen by Mastercraft Kitchens for under-cabinet and inside-cabinet lighting, where a slim, flexible light source is needed rather than a fitted downlight or spotlight.

The strip can be cut every 50mm, so it is trimmed to fit the exact run of cabinets or shelving it is lighting, rather than being left to overhang or bunch up at the end. Cable is already soldered to both ends, with 2 metres of lead on each side, which gives you the reach to route wiring back to a driver without extra joins or connectors along the way. A 20W driver is included, matched to the 4W per metre output of the strip.

Key

Benefits

• Natural white light suits everyday kitchen tasks, giving clear visibility on worktops without the yellow cast of warmer tones or the coldness of daylight strips.
• Cut points every 50mm mean the tape can be sized to fit the cabinet run in front of you, so light falls where you need it rather than spilling past the edge.
• Soldered cable at both ends removes the need for extra connectors, which keeps the wiring simpler and reduces the number of joints that could work loose over time.
• A flexible strip format allows it to be fitted under wall cabinets, inside deep drawers or along the underside of open shelving, wherever a slim light line is more practical than a fixed fitting.
• The included driver is matched to the tape's power draw, so you are not left sourcing a separate transformer to get it running.

What's Included

• 5 metres of natural white LED tape, 60 lights per metre
• 2 x 2 metre soldered cables, one at each end
• 20W driver

Specifications

• Length: 5 metres
• Light density: 60 lights per metre
• Cut points: every 50mm
• Power: 4W per metre
• Driver: 20W
• Colour temperature: natural white