5M natural LED strip, 60 lights per metre, 50mm cut points, 2 x 2M soldered cable at both ends (4W p

This is an LED tape strip chosen by Mastercraft Kitchens for kitchens where you want low, even light rather than a single bright source. It runs 5 metres in length, with 60 LEDs per metre, and is finished with 2 metre soldered cables at each end ready for connection. You will typically find it fitted under wall cabinets, inside glazed units, or along a plinth, giving a wash of light exactly where you need it.

Key

Benefits

• Cut points every 50mm mean the strip can be trimmed to fit the exact run of your cabinet line, rather than leaving a length that overhangs or falls short.
• 60 LEDs per metre gives a close, even spread of light along worktops, so you get consistent illumination without visible hot spots or gaps.
• The natural colour temperature renders worktop colours and food true to how they look in daylight, which matters if you are prepping or checking colour while cooking.
• Soldered cable ends at both sides make for a neater, more reliable connection than clip-on fittings, reducing the risk of a loose contact over time.
• At 4W per metre, it runs cool enough for continuous use under cabinets without generating noticeable heat against the underside of the unit.

One thing worth knowing: this strip needs a compatible driver and, if you want dimming, a suitable controller. Neither is included here, so your designer will specify these alongside the strip to match your run length and how you want to control the light.

Specifications

• Length: 5 metres
• LED density: 60 lights per metre
• Power: 4W per metre
• Colour temperature: Natural white
• Cut points: Every 50mm
• Cable: 2 x 2 metre soldered cables, one at each end