Zenduo15 340/180U BBL

The Zenduo15 340/180U BBL is a 1.5 bowl stainless steel sink from The 1810 Company, chosen by Mastercraft Kitchens for kitchens where you want a main bowl for everyday washing up and a smaller second bowl for draining, prep or soaking. Its handmade 15mm radius corners give the bowls a soft, rounded look rather than a sharp industrial edge. It can be fitted undermounted, inset or flush, so it suits a range of worktop styles.

Key

Benefits

• The 1.5 bowl layout gives you a full-size main bowl for pans and washing up, with a smaller bowl alongside for rinsing vegetables, draining or keeping washing-up separate from food prep.
• Undermount, inset or flush fitting means your kitchen designer can specify the installation that best matches your worktop material and the look you want, whether that's a clean line under stone or a more traditional inset finish.
• Insusound® sound insulation is built in, which cuts down on the clatter and echo you'd otherwise get when water runs or pans go into a steel sink, particularly noticeable in open plan kitchens where the sink sits close to living space.
• The 1.2mm steel thickness gives the bowl a solid, substantial feel underhand, resisting dents and denting noise better than thinner gauge sinks.
• A 3½ inch basket strainer waste and overflow are included, so you have proper control over standing water and can strain food waste before it goes down the plug rather than fishing it out afterwards.
• The satin finish is practical for daily use, showing fewer water marks and fingerprints than a high shine polish, so it stays looking clean between wipe downs.
• A Maximiser plumbing kit is included, which helps make the most of the cabinet space underneath, useful if you're also fitting a bin or storage in the same cupboard.

What's Included

• Handmade 1.5 bowl sink with clips for flush or inset installation
• 3½ inch basket strainer waste and overflow
• Maximiser plumbing kit
• Individually boxed for delivery and installation

Specifications

• Bowl configuration: 1.5 bowls
• Installation types: Inset, undermount, flush
• Material: Stainless steel, 1.2mm thickness
• Finish: Satin
• Minimum sink cabinet size: 600mm