The TANDEMBOX antaro is a drawer system chosen by Mastercraft Kitchens for cabinets where you need real depth and strength, not just a shallow pan drawer. This is the D height version, a tall pull-out drawer with a glass side panel and a high front, designed for a 500mm cabinet depth. It sits inside the carcass on runners rated to carry up to 50kg, so it can hold everyday cooking equipment, crockery or larder items without strain.
Because it is a lay-on drawer, the front is fixed directly to the drawer box rather than the cabinet face, which gives a cleaner line when the drawer is open and closed. The glass side panel lets you see contents at a glance, which is useful in a tall drawer where items can sit further back than you'd expect. BLUMOTION is built in, so the drawer draws itself shut gently over the last part of travel rather than slamming, even when it's full.
Key
Benefits
- The D height box gives you the depth to store tall items upright, such as bottles, tins or stacked pans, rather than laying them flat as you would in a shallower drawer.
- A 50kg dynamic load rating means the drawer stays smooth and stable even when loaded with heavier items, which matters most in a kitchen where drawers get used daily.
- The glass side panel means you can check what's inside without pulling the drawer fully open, helpful in a busy kitchen where you're often reaching in with one hand.
- BLUMOTION soft close reduces noise and wear on the runners, so the drawer feels controlled rather than heavy or abrupt, even at full extension.
- The high lay-on front gives a flush, tidy appearance from outside the cabinet, which suits kitchens where clean drawer fronts are part of the overall design.
Specifications
- Cabinet depth: 500mm
- Height: D height (tall drawer box)
- Colour: Grey
- Nominal length: 500mm
- Dynamic load capacity: 50kg
- Front fixing: Lay-on, high front
- Closing mechanism: BLUMOTION soft close
- Side panel: Glass
