The Rangemaster Aquatrend 1 is a dual lever mixer tap, fitted at the sink and used every time you fill a pan, rinse vegetables or wash up. With a separate lever for hot and cold, you get precise control over temperature and flow, which matters when you're juggling tasks at the sink and don't want to think twice about getting the water right.
It's made from stainless steel and built around a quarter turn ceramic disc valve, chosen by Mastercraft Kitchens for its reliability and smooth action. Ceramic disc valves are less prone to dripping or stiffening over time than older washer based taps, so the tap should still feel as good to use in a few years as it does on day one.
Key Benefits
- Dual lever control lets you set hot and cold independently, useful for quick adjustments when filling a kettle versus running a hot wash for pots.
- The anti-splash honeycomb aerator softens the water flow, so you get less splashback onto worktops and clothing when the tap is running at full pressure.
- A spout reach of 216mm gives reasonable coverage across a standard sink bowl, helpful when rinsing larger items like trays or chopping boards.
- Rigid copper inlet pipes are supplied, which simplifies the plumbing connection during installation.
- DDA compliant, so the tap meets accessibility requirements where this is a consideration in your kitchen design.
- Available in four finishes, brushed brass, chrome, matt black and brushed stainless steel, so it can be matched to your taps, handles and other hardware.
Operating pressure runs from 0.3 to 5.5 bar, which covers most UK mains and gravity fed systems, though it's worth checking your own water pressure against this range before fitting. Overall height and spout exit height vary slightly between finishes, so confirm the exact figures for the finish you choose if clearance under wall units or windows is tight.
What's Included
- Anti-splash honeycomb aerator
- Rigid copper inlet pipes
Specifications
- Material: Stainless steel
- Tap type: Dual lever
- Control valve: Quarter turn ceramic disc
- Operating pressure: 0.3 to 5.5 bar
- Overall height: 379mm (brushed brass; varies by finish)
- Spout exit reach: 216mm
- Spout exit height: 253mm (brushed brass; varies by finish)
- DDA compliant: Yes
- Guarantee: 5 years
- Finishes: Brushed brass, chrome, matt black, brushed stainless steel
Some options are not held in stock and take longer to reach you. The estimated dispatch time is shown against each of those options.
