This pull-out larder unit is fitted inside a tall kitchen cabinet, turning a deep, often awkward space into full-height storage you can actually see and reach. Chosen by Mastercraft Kitchens for its chrome linear wire baskets and centre mounting, it pulls forward on soft closing runners so everything inside comes to you, rather than you reaching into the back of a cupboard.
It is specified for tall cabinets measuring 300mm or 400mm in width, with an internal depth of at least 485mm and a height of either 1700 to 1950mm or 1950 to 2200mm. The centre mounting means you get full access to either side of the baskets, which makes it easier to see what you have and avoid food getting lost at the back.
Key Benefits
- Five wire baskets pull out together, so you can view and reach everything in one motion instead of unloading shelf by shelf.
- Centre mounting gives clear access from both sides of the unit, useful if the cabinet sits between two work areas or near a corner.
- Soft closing action on the bottom runner means the pull-out eases itself shut, with no banging even if you close it one handed while carrying something.
- Chrome plated baskets are made from a heavier gauge wire, built to take the everyday weight of tins, packets and jars without flexing.
- The tubular steel hanging frame and ball bearing runners keep the action steady over time, which matters in a unit that gets opened several times a day.
- Inter-stacking baskets and a split frame keep the unit compact to handle during fitting, which can simplify installation in a tighter kitchen.
Because the cabinet needs a minimum internal depth of 485mm, this is worth checking against your kitchen plan before you commit to the layout, particularly in smaller kitchens where cabinet depth is often reduced to save floor space.
What's Included
- 1 hanging frame with mounting accessories
- 1 ball bearing runner
- 1 top runner
- 5 storage baskets (300mm cabinets receive 3 baskets at 225mm and 2 at 250mm width; 400mm cabinets receive 3 baskets at 325mm and 2 at 350mm width)
- 1 bracket and crossbar
- 1 door connecting strip
- Fixing materials and fitting instructions
Specifications
- Cabinet width: 300mm or 400mm
- Cabinet height: 1700 to 1950mm or 1950 to 2200mm
- Minimum internal cabinet depth: 485mm
- Hanging frame: tubular steel, 25 x 25mm, silver epoxy coated
- Runners, bracket, crossbar and connecting strip: steel, silver epoxy coated
- Storage baskets: heavier gauge steel wire, chrome plated
- Installation: screw fixing
- Manufactured in the UK
