Abode Stria 1.5B Inset Sink & Hilton Tap Pack

The Abode Stria 1.5 Bowl Inset Sink and Hilton Tap Pack pairs a brushed stainless steel sink with a matching chrome tap, chosen by Mastercraft Kitchens for kitchens where a full size main bowl and a smaller second bowl both earn their keep. It sits into the worktop as an inset design, with the tap mounted alongside on its own tap hole, giving you a practical washing and prep station in one unit.

Key

Benefits

• The main bowl measures 340 x 400 x 149mm, deep enough to take large pans, roasting trays and washing up bowls without water splashing over the edge.
• The second bowl, at 160 x 300 x 85mm, gives you a separate space for rinsing vegetables, draining pasta or soaking smaller items while the main bowl stays free.
• The linear drainer design keeps drainage grooves running in one direction, which makes it easier to wipe down and keep looking clean day to day.
• Made from 0.7mm stainless steel with a brushed finish, so light marks and water spots are less noticeable than on a polished surface.
• The sink is reversible, so it can be fitted with the main bowl on the left or right depending on how your worktop and drainer layout works best.
• A waste kit is included, along with a sealing strip, fixing clips and a tap hole cover plate, so the fitting has what it needs on installation day.
• The Hilton tap has a spout reach of 214mm, giving reasonable clearance over both bowls for filling pans and rinsing dishes.
• WRAS approval on the tap means it meets recognised UK water regulations for safe use in a domestic kitchen.

One point worth knowing before you finalise your layout: this sink needs a cabinet at least 600mm wide, so it is not suitable for narrower runs. The tap also needs a minimum water pressure of 0.4 bar to work as intended, which is worth checking against your home's plumbing before installation.

What's Included

• Abode