The Abode Matrix R25 is a single bowl stainless steel sink, sized to fit neatly into a compact run of worktop without dominating it. Its 25mm corner radius gives the bowl a softer, more rounded look than a sharp-edged sink, while the polished finish keeps it looking sharp against most worktop materials. It can be fitted either as an inset sink, sitting on top of the worktop, or as an undermount, fixed beneath it for a cleaner line where the worktop meets the bowl.
Key
Benefits
- The single 400mm square bowl gives you a good depth of 200mm, useful for standing pans on their side or soaking larger dishes without water going everywhere.
- Choosing undermount fitting means there's no raised rim to catch crumbs or water, so wiping worktop debris straight into the bowl is quicker and cleaner.
- The rounded internal bowl curves make it easier to clean right into the corners, rather than scrubbing at sharp right angles where grime tends to sit.
- At 304 grade stainless steel, the sink is built to resist everyday knocks, scratches and staining, so it keeps its finish through years of regular use.
- The compact footprint means it can work in a smaller kitchen or as a second prep sink, provided your cabinet width allows for it.
- A 10 year manufacturer's guarantee gives you confidence in its construction over the long term.
Because the inset and undermount cut-outs differ slightly, cabinet size matters here. Mastercraft Kitchens specifies a minimum cabinet width of 500mm for undermount fitting and 450mm for inset fitting, so this is one to check against your cabinet run early in the design rather than after the worktop is cut.
What's Included
- Short bolt strainer waste (AX1005R)
- Rectangular overflow (AX1006)
- Documentation (AX4029)
- Fixing clips (AX1107)
- Undermount clips (AX1174)
- Pipework (AX1008)
Specifications
- Type: Inset/Undermount
- Colour/Finish: Stainless Steel, Polished
- Product Dimensions: W 440 x D 440 x H 200mm
- Main Bowl Dimensions: W 400 x D 400 x H 200mm
- Cut Out Dimensions (Undermount): W 405 x D 405mm
- Cut Out Dimensions (Inset): W 420 x D 420mm
- Minimum Cabinet Width: 500mm (Undermount) / 450mm (Inset)
- Corner
