Abode Matrix R25 1.5B RHMB Inset/Undermount Sink - St/Steel

The Abode Matrix R25 is a 1.5 bowl stainless steel sink, chosen by Mastercraft Kitchens for kitchens that need a full-sized main bowl alongside a smaller second bowl for draining, soaking or washing up separately. This is the right handed version, with the main bowl on the right and the smaller bowl on the left. It can be fitted as an inset or an undermount sink, depending on your worktop and the finish you want in your kitchen.

Key

Benefits

• The main bowl measures 340 x 400mm, deep enough for oven trays and stacked pans, while the second bowl gives you a separate space for smaller jobs or draining without cluttering the main bowl.
• A 25mm corner radius keeps the bowl curves gentle rather than sharp, which makes wiping round the inside quicker and leaves fewer awkward corners for grime to sit in.
• Fitting flush or as an inset gives you flexibility during the kitchen design, so the sink can suit either a worktop with a visible rim or a cleaner undermount look.
• Built from 304 grade stainless steel, so it stands up to daily use, from hot pans to acidic foods, without losing its polished finish over time.
• The waste kit, overflow, fixing clips and pipework are all included, so everything needed to fit the sink to your cabinet arrives together.
• A 10 year guarantee from Abode gives you reassurance that the sink is built to last well beyond the kitchen fitting itself.

One practical point worth knowing before you commit to this sink in your layout: it needs a cabinet at least 600mm wide. If your base cabinet run is tighter than that, this particular size will not sit comfortably, and a smaller Matrix option would need to be considered instead.

What's Included

• 2x AX1005R short bolt strainer waste
• 2x AX1006 rectangular overflow
• 1x AX4029 documentation
• 1x AX1109 fixing clips
• 2x AX1174 undermount clips
• 1x AX1009 pipework

Specifications

• Type: Inset/Undermount
• Colour and finish: Stainless Steel, Polished
• Product dimensions: W 580 x D 440 x H 195mm
• Main bowl: W 340 x D 400 x H 195mm
• Second bowl: W 180 x D 400 x H 148mm
• Inset cut-out: W 560 x D 420mm
• Undermount cut-out: W 546 x D 407mm
• Corner radius: 25mm
• Minimum cabinet