Abode Connekt 1.5B Inset St/Steel Sink & Atlas

The Abode Connekt 1.5 Bowl Inset Sink, paired with the Abode Atlas tap, is specified for Mastercraft kitchen designs where you want a full-sized main bowl for everyday washing up alongside a smaller second bowl for prep or draining. It sits into a cut worktop as an inset fitting, sitting flush to the surface, and works with cabinets from 600mm wide upwards. The polished stainless steel finish gives you a clean, practical look that suits most kitchen styles without drawing too much attention to itself.

Key

Benefits

• The 1.5 bowl layout gives you a generous main bowl at 340mm wide and 400mm deep, big enough for oven trays and stockpots, with a smaller second bowl handy for rinsing vegetables or resting items while the main bowl is in use.
• The drainer position is reversible, so your kitchen fitter can set the sink to suit which side you prefer to work from, whether that is next to a window or closer to your cooking zone.
• Built from 304 grade stainless steel at 0.8mm gauge, so it stands up to daily knocks and scrubbing without denting or dulling over time.
• The Orbit waste fitted as standard has a smooth, lined design that helps water drain away cleanly rather than pooling around the plug.
• The Atlas tap uses a single lever, so you can control temperature and flow with one hand, useful when your other hand is holding a pan or a child.
• An antisplash spout is fitted as standard, which keeps water directed into the bowl rather than spraying back up at you.
• The sink carries a 10 year guarantee and the tap a 5 year guarantee, giving you reassurance that both are built for long-term daily use.

One practical note: the Atlas tap needs a minimum water pressure of 0.5 bar to work as intended, so it is worth checking your household water pressure before installation if you are on a low-pressure system.

Specifications

• Sink Type: Inset, 1.5 bowl, reversible
• Sink Dimensions: W 1000 x D 500 x H 195mm
• Cut-out Dimensions: W 980 x D 480mm
• Minimum Cabinet Width: